Anti Wear Durable Metal Slitter Knives Cemented Carbide Blade OEM

HRc75 Cemented Carbide Knife Big Hardness Long Life Span Metal Sheet Cutting Blade

Sharp edge

The blade is sharp, smooth, sharp and durable. Imported precision processing equipment can process various non-standard products to ensure product accuracy.

Material: Carbide
Sizes we offer: see table below
Choose better materials for use, such as high hardness, good toughness, and long service life (alloy steel), without frequent tool changes, saving tool changing time and improving work efficiency.

No burrs on sharp edge blades

Sharp blade, no burrs on the blade, making the cutting surface beautiful. To a certain extent, the reasonable cutting angle improves the performance and life of the blade

Acceptable for customer design.

Flatness and Parallelism
Sufficiently high flatness and parallelism are necessary conditions to ensure that the shear gap between the upper and lower slitting blades of the slitter is always consistent during dynamic operation. Proper clearance is at the heart of ensuring precise cuts. If the surface of the round blade is not flat, or if the sides of the blade are not parallel, the gap between the upper and lower blades is always changing. In addition, the reaction forces generated by the extrusion of the strip during slitting also lead to continuous changes in the gap. This would make it impossible to obtain burr-free strips.
Thickness Tolerance
The thickness tolerance of the blade is mainly to ensure the cutting accuracy of the metal strip width and prevent the accumulation of errors in the tool assembly. If it is not possible to provide a blade with a thickness tolerance of 1~2μm or even 0.5μm, the cumulative error when assembling multiple shears is inevitable.
Surface roughness
The good surface roughness of the blade surface can improve the rigidity of the whole shearing system, increase the sharpness of the blade, reduce micro-cracks on the blade, and prolong the life of the blade. Different machining techniques may result in different surface finishes. For high-precision non-ferrous metal processing, generally need to choose 0.05-0.1μm. For cutting other thin coils, you can choose a surface roughness of 0.1-0.2μm.